ANGEL STEEL INDUSTRIES

Learn how to configure your router by choosing a path Below

Why is routerlogin.net not working on my device?

A complete solution To access routerlogin.net to log in or setup, up on my device.

-Before Typing the URL Routerlogin.net to do the login or setup of the Router. The User device (computer/cellphone/Tablet) should be connected to the same router’s wifi network.

-If it shows the same Error that “you are not connected to your router’s WIFI network. Clear the cache memory of your web browser and try to access the roterlogin.net login page once again.

Tip: The user Can use the default IP address 192.168.1.1 to access the router setup page.

Steps to login using www.routerlogin.net setup page?

-To login into the setup page first, make sure that the User login device is connected to the Router wifi network.

-Use the default web browser and type Url www.routerlogin.net in the Top address bar to log in to the setup page of the Any Netgear wifi Router.

-Fill in the username and www.routerlogin.net default password which will be on the back of the Netgear nighthawk Router on the white label.

-After putting in the correct Information. Users can log in to the www.routerlogin.net setup page and can access the settings of the wifi router.

Netgear Firmware update with the Nighthawk App?

The simplest and easiest way to make the Netgear Firmware update from smartphone and device using the Nighthawk app and by following 3 simple steps:

-First, install the Nighthawk app on the smartphone and make sure that you are connected to the same router WiFi network.

-Login with the default Admin password of Nighthawk Router to Firmware update. You’re on the Nighthawk app dashboard page.

-Now, click on the Nighthawk router image and scroll down to check for firmware updates or the user can remotely update Netgear router firmware if there is an update available.

How to do a password reset using Routerlogin.net?

Simple steps to do the admin password Reset in case You changed the router username password and forgot the old password that you have created for routerlogin.net.

-To do a password reset on the router using any web browser type www.routerlogin.net in the address field. A login page of your wifi router opens.

-Click on cancel, it will ask you to Enter The serial number of the wifi router. The serial no is on the product label at the back of the router in white label.

-Click on continue and answer the two security questions displayed on the screen.

-Then click continue. A screen comes up that says router password reset.
Enter the new admin password or set new security questions

-Click on the option Next and the password reset is successfully displayed on your screen.
Click on login to enter the new password for router login.

Get Help with all Types of Model in your Router & Extender Setup

RS700S

XR1000

RAXE500

LAX20

RAX70

RAX50

AX2400

AX3000

RAXE450

R8000

R7000

R7800

MK92

MK73S

MK64

MK83

MK6W

MS70

MR80

MR70

FAQ

You can sync both the mesh router and the satellite with the help of Sync button. Press the sync button the back side of the router than press the sync button on the satellite wait for 2-3 minutes. Your satellite will sync to the router.

You can login into your router using the IP or Web-address of your router. You can use the default IP address by typing in browser 192.168.1.1 or 10.0.0.1. You can also use the web-address routerlogin.net . 

Blinking light means your router is either booting up or doing the firmware update. Wait for 2-3 mintue before rebooting.

For doing the firmware update you need to login into the router webpage. Go to advanve > Adminstration > Firmware Update.

In order to change the wifi name and the password you need to login into the login webpage of router . You can find the wireless settings under Basic > Wireless.

In oder to reset the router you need a paper clip press hold it for 30 seconds into the reset pinhole. Your router will be reset

Disclaimer

We are the third party with nothing to do with Netgear, this website is purely for informational purposes. All the images are only for reference. We only train you on How to do setup or login into the Router,

We are not authorized repair service center of any brand in any way.

ANGEL STEEL INDUSTRIES

ADDRESS: GROUND FLOOR, SHOP NO-7, 66 COOPER BUILDING, TP STREET, 6 TH KUMBHARWADA

EMAIL: pcactivation4094@gmail.com